Posts

Showing posts from November, 2018

Honda CT90 Engine Reassembly

Image
I have one 1971 CT90 where I was going to rebuild the clutch because the kickstarter just wasn't turning over the engine like it used too,  and I also had a Big Bore kit from DrATV that I wanted to install. My intent was to just do the top end and rebuild the clutch with new disks, but when I opened up the cases to rebuild the clutch pack I found a slick black slime in the bottom of the case.  I didn't like the idea that there could be black slime in the rest of the engine, so I decided to disassemble the entire engine to make sure I cleaned everything out.  Since I was tearing everything apart I thought I would document step by step how everything goes back together in this post in case others were interested in knowing what the inner workings of a CT90 engine look like. Links to Related Posts: My Honda CT90 Clutch and Headset Nut Tool Cut Away of a CT90 Engine - CT90 Engine Exposed! Repairing Damaged CT90 Spark Plug Threads Using a Time-Sert Thread Insert CT90 Clutch P
6 comments
Read more

Product Review - Audew Multi-Function Jump Starter

Image
Product Review - Audew Multi-Function Jump Starter This is a review of a small lightweight multi-function jump starter and portable power source made by Audew.  While not directly related to Honda CT90's, this is a handy device to have available to start a dead battery in your primary vehicle or charge up your cell phone or other USB powered devices while out on a remote backcountry ride on your CT90. The Audew multi-function Jump Starter is  available at Amazon here at this link . I want to acknowledge upfront that I received this multi-function jump starter from the manufacture in exchange for doing this review.  The link to Audew's website is here in case you were interested in other products from Audew.
1 comment
Read more